The enthalpy of formation of magnesium sulfate ion pairs

The enthalpies of dilution of lithium, sodium, potassium, and magnesium chloride and sulfate solutions in the range 0.1 to 1.0 m have been measured at 30°C with a microcalorimeter. The relative apparent enthalpies φ_L of these solutions have been determined with the aid of an extended form of the Debye-Hückel limiting law $$\phi _L = S_H I^{1/2} [1/(1 + I^{1/2} ) - (\sigma /3)] + {\rm B}{\rm I} + CI^{3/2} $$ whereS _H is the limiting-law slope, σ = 3/I^3/2 × [(1+I^1/2 ? 1/(1+I^1/2 ? 2 ln (2+I^1/2)], andB andC are empirical constants. This equation fits the experimental results to within a standard deviation of 2 cal-mole^?1 for all the salts. The measured φ_L for the MgSO₄ solutions were compared to those calculated using the additivity principle, φ_L(MgCl₂) + φ_L(Na₂SO₄) ? 2φ_L(NaCl), and the extended Debye-Hückel equation. The results of this comparison have been used to calculate the ΔH _A ^o for the formation of MgSO ₄ ⁰ . A value of ΔH _A ^o = 1.15 to 1.36 was obtained, depending upon the φ_L estimates for the free ions Mg²⁺ and SO ₄ ^2? . The results are briefly discussed and compared to the results obtained by other workers.     

Determination of in vitro permeability of drug candidates through a caco-2 cell monolayer by liquid chromatography/tandem mass spectrometry

Studying the permeability of compounds across a Caco-2 cell monolayer is an established in vitro model to screen for oral absorption and to evaluate the mechanism of transport. This assay can also be used to evaluate compounds as potential P-glycoprotein substrates and/or inhibitors. The traditional methods of sample analysis (high-performance liquid chromatography (HPLC) with a UV or fluorescence detector) limit the throughput and sensitivity of this assay. Data are presented here describing the use of liquid chromatography/tandem mass spectrometry (LC/MS/MS) for the analysis of samples derived from the Caco-2 cell studies. During the analysis an automatic switching valve was used to divert the flow from the HPLC column to waste for the first minute, preventing the early eluting salts from entering and contaminating the LC/MS interface. This approach allows the rapid and accurate determination of drug transport across the Caco-2 cell monolayer. The high sensitivity and specificity of LC/MS/MS make this technique an ideal candidate for the low concentration and high throughput routine analysis of Caco-2 cell solutions, especially if multiple compounds are administered and analyzed simultaneously. Thus, the use of LC/MS/MS will increase the value of the Caco-2 cell assay as an in vitro screening tool.     

Reaction of Tetracopper(I)-Phosphonitocavitand with PhSeSiMe3: Synthesis and Structure of a Polyanionic Cluster [pyH]6[(CuCl)9(μ3-SePh)5(μ4-SePh)]

Treatment of tetracopper(I)-phosphonitocavitand [1·Cu₄(μ-Cl)₄(μ₄-Cl)] (2) (1 = tetraphosphonitocavitand [rccc-2,8,14,20-tetrakis-(iso-butyl)-phosphonitocavitand (C₄₄H₄₈O₈P₄Ph₄)]) with PhSeSiMe₃ in THF at low temperature afforded a novel polyanionic cluster [pyH]₆[(CuCl)₉(μ₃-SePh)₅(μ₄-SePh)] (4) as a major product along with a new tetracopper(I)-phosphonitocavitand (3) with a centered μ₃-Cl. Molecular structure of anionic cluster in 4 consists of six PhSe⁻ bridging ligands containing five μ₃-SePh and one exceptional μ₄-SePh bridging nine copper atoms, of which eight copper atoms have trigonal coordination geometry and the other has distorted tetrahedral geometry. Dedicated to Professor Han-Qin Liu on the occasion of his 70th birthday.     

Oxidation of guanosine derivatives by a platinum(IV) complex: internal electron transfer through cyclization

Many transition-metal complexes mediate DNA oxidation in the presence of oxidizing radiation, photosensitizers, or oxidants. The DNA oxidation products depend on the nature of the metal complex and the structure of the DNA. Earlier we reported trans-d,l-1,2-diaminocyclohexanetetrachloroplatinum (trans-Pt(d,l)(1,2-(NH(2))(2)C(6)H(10))Cl(4), [Pt(IV)Cl(4)(dach)]; dach = diaminocyclohexane) oxidizes 2'-deoxyguanosine 5'-monophosphate (5'-dGMP) to 7,8-dihydro-8-oxo-2'-deoxyguanosine 5'-monophosphate (8-oxo-5'-dGMP) stoichiometrically. In this paper we report that [Pt(IV)Cl(4)(dach)] also oxidizes 2'-deoxyguanosine 3'-monophosphate (3'-dGMP) stoichiometrically. The final oxidation product is not 8-oxo-3'-dGMP, but cyclic (5'-O-C8)-3'-dGMP. The reaction was studied by high-performance liquid chromatography, (1)H and (31)P nuclear magnetic resonance, and matrix-assisted laser desorption ionization time-of-flight mass spectrometry. The proposed mechanism involves Pt(IV) binding to N7 of 3'-dGMP followed by nucleophilic attack of a 5'-hydroxyl oxygen to C8 of G and an inner-sphere, 2e(-) transfer to produce cyclic (5'-O-C8)-3'-dGMP and [Pt(II)Cl(2)(dach)]. The same mechanism applies to 5'-d[GTTTT]-3', where the 5'-dG is oxidized to cyclic (5'-O-C8)-dG. The Pt(IV) complex binds to N7 of guanine in cGMP, 9-Mxan, 5'-d[TTGTT]-3', and 5'-d[TTTTG]-3', but no subsequent transfer of electrons occurs in these. The results indicate that a good nucleophilic group at the 5' position is required for the redox reaction between guanosine and the Pt(IV) complex.     

Construction of recombinant Escherichia coli strais for production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate)

Plastic wastes constitute a worldwide environmental problem, and the demand for biodegradable plastics has become high. One of the most important characteristics of microbial polyesters is that they are thermoplastic with environmentally degradable properties. In this study, pUC 19/PHA was cloned and transformed into three different Escherichia coli strains. Among the three strains that were successfully expressed in the production of polyhydroxyalkanoates (PHA), E. coli HMS174 had the highest yield in the production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (P[HB-HV]). The cell dry weight and PHA content of recombinant HMS174 reached as high as 10.27 g/L and 43% (w/w), respectively, in fed-batch fermentor culture. The copolymer of PHA, P(HB-HV), was found in the cells, and the biopolymers accumulated were identified and analyzed by gas chromatography, proton nuclear magnetic resonance spectroscopy, and differential scanning calorimetry. We demonstrated clearly that the E. coli host for PHA production has to be carefully selected to obtain a high yield. The results obtained indicated that a superior E. coli with high PHA production can be constructed with a desirable ratio of P(HB-HV), which has potential applications in industry and medicine.     

Electron energy loss studies of room-temperature co adsorption on Cu(100) induced by electron or ion irradiation

A custom-built multi-technique portable spectrometer was used to study the vibrational (and electronic) excitations associated with the “anomalous” CO adsorption recently observed on clean and oxidized Cu(100) surfaces at room temperature. Results from the electron energy loss (and thermal desorption) experiments have provided strong evidence for in-situ CO production induced by low-energy electron or ion irradiation of CO or C₂H₄ on Cu(100). In particular, the C-O vibrational stretch frequency for the room-temperature CO adsorption was found to be red-shifted by 9 meV from its nominal position (259 meV) and could be observed even at temperature as high as 420 K. Several plausible mechanisms involving coadsorbate interactions with CO on metal surfaces have been discussed. A direct interaction model involving partial bonding between CO, adsorbed on an atop site, and a coadsorbed O atom in a four-fold hollow site was found to be adequate in explaining the observed red shift and the apparent stabilization of CO on Cu(100) at room temperature.     

One-step polymerization of polytrithiocarbonate using phase-transfer catalyst

A series of aliphatic and aromatic polytrithiocarbonates was prepared using a novel “one-pot” synthesis procedure employing a phase-transfer catalyst. The starting reagents were either an aliphatic or an aromatic dihalide and an excessive amount of carbon disulfide. The effects of the phase-transfer catalyst and reaction conditions on yield were studied. The structure and composition of the polymers and reaction side-products were determined from infrared, ultraviolet, ¹H-NMR spectra, and elemental analyses. The polymers were further characterized by viscosity measurement and thermal analysis. © 1993 John Wiley & Sons, Inc.     

Enantioselective guest binding and dynamic resolution of cationic ruthenium complexes by a chiral metal-ligand assembly

A supramolecular metal-ligand assembly encapsulates a variety of cationic half-sandwich ruthenium complexes. Due to the chirality of both host and guest, chiral recognition is observed with diastereomeric excesses up to 70%. The chiral cavity can be used to carry out a dynamic resolution of the rapidly equilibrating enantiomers of the chiral organometallic guest.